mgs
[Top] [All Lists]

Re: pedal wobble

To: Daniel Hackney <daniel.hackney@gmail.com>, Barney Gaylord
Subject: Re: pedal wobble
From: Hans Duinhoven <h.duinhoven@planet.nl>
Date: Wed, 20 Dec 2006 21:47:49 +0100
Right so.

One other thing.
If the bushings are replaced, the inner side is to be made to to the right 
fight by a reamer.
An adjustable version might do the job well.

Cheers,

Hans

1971 BGT with pedals not wobbling anymore...

----- Original Message ----- 
From: "Daniel Hackney" <daniel.hackney@gmail.com>
To: "Barney Gaylord" <barneymg@mgaguru.com>
Cc: <mgs@autox.team.net>
Sent: Wednesday, December 20, 2006 2:02 AM
Subject: Re: pedal wobble


> Barney,
>
> Your description of the assembly clears things up significantly.
> Thanks as always for the advice.
>
> -Dan
>
> On 12/19/06, Barney Gaylord <barneymg@mgaguru.com> wrote:
> <snip>
>> It is a bit of a pain to R&R the pedals, but the bushings are
>> otherwise fairly cheap and easy to replace.  I spent an extra half
>> hour once measuring things and adjusting the length of the steel
>> bearing tube to minimize clearance for the thrust washers.  This was
>> time well spent, as I haven't felt the need to change the bushings
>> again in a very long time.
>>
>> Barney Gaylord
>> 1958 MGA with an attitude
>> http://MGAguru.com




<Prev in Thread] Current Thread [Next in Thread>