mgs
[Top] [All Lists]

Re: What are the normal voltages going to the dynamo D and F

To: "Barney Gaylord" <barneymg@mgaguru.com>
Subject: Re: What are the normal voltages going to the dynamo D and F
From: "Simon Matthews" <simon.d.matthews@gmail.com>
Date: Wed, 3 Jan 2007 16:22:49 -0800
Barney,

I asked because fairly recently, I started noticing a buzzing noise
that appeared to be coming from the bulkhead and was dependent on
engine speed. I had never heard this before (or rather, never noticed
it), so I was wondering if it implied that the regulator was fautly in
some way.

Regards,
Simon

On 1/3/07, Barney Gaylord <barneymg@mgaguru.com> wrote:
> At 10:14 AM 1/3/2007 -0800, Simon Matthews wrote:
> >....
> >How quickly should the electro-mechanical regulator on an MGA switch?
> >Should it switch fast enough to make a buzzing sound?
> >....
>
> Yes it vibrates.  The frequency may be about the same as ignition
> spark at idle speed, about 30 contact cycles per second (in the
> ballpark).  See here: http://chicagolandmgclub.com/techtips/general/585.html
> Function of the regulator relay starts half way down the page just
> after the last picture.




<Prev in Thread] Current Thread [Next in Thread>