Matt:
I can tell you how I do mine, I put liquid gasket on the vale cover, then
both sides of the gasket and on the cylinder head, I place the gasket on the
valve cover and hold the gasket in place with clothespins till everything is
tacky, then place the valve cover plus attached gasket onto the cylinder
head, never had a leaking problem and it's pretty mess free, really it
is!!!.
----- Original Message -----
From: "Matthew Milkevitch" <mmilkevitch@yahoo.com>
To: <mgs@autox.team.net>
Sent: Sunday, November 04, 2007 10:09 AM
Subject: [Mgs] valve cover gasket
> Fellow Listers:
>
> Quick question: When installing a new valve cover gasket, should one
put some permatex sealant on one or both sides of the gasket (valve cover
side and cyl head side) or should the gasket be installed completely "dry"?
>
> Thanks for the help....
>
> Matt Milkevitch
> '74 BGT
> _______________________________________________
> 1971mgb@cox.net
>
> Edit your replies
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
>
> --
> No virus found in this incoming message.
> Version: 7.5.503 / Virus Database: 269.15.20/1108 - Release Date:
11/3/2007 9:42 PM
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|