mgs
[Top] [All Lists]

Re: [Mgs] brakes

To: <Mgs@autox.team.net>
Subject: Re: [Mgs] brakes
From: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
Date: Wed, 5 Dec 2007 08:55:00 -0000
It's the pedal that operates the switch, so this shouldn't have changed. 
Also problems here usually cause either the brake lights to be on all the 
time (switch needs screwing in a bit) or if it is screwed in too far and 
isn't letting the brakes come off enough then as the fluid expands with heat 
it causes the brakes to jam on.  It would also stop you bleeding either or 
both circuits.  This problem affects both dual and single master systems 
where the brake light switch is on the pedal box or (later cars) in the 
cabin by the pedals.

PaulH.

----- Original Message ----- 
> Dual master system with the brake light switch on the cover? If so, set 
> the
> pedal free-play with the switch, since you changed the master this
> adjustment may not be correct.
_______________________________________________

Edit your replies

Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

<Prev in Thread] Current Thread [Next in Thread>