The only pistons I have seen are flat or dished. Are there domed
pistons available? I don't expect there were any domed stock ones.
Jim
WSpohn4@aol.com wrote:
> 1500/1600 are small valve small combustion chamber heads. 1622/1800
> are larger valve and chamber. They can be used on the smaller
> displacement engines but require higher compression pistons or you'll
> end up with very low compression.
>
> Bill
>
> In a message dated 28/02/2008 5:41:45 P.M. Pacific Standard Time,
> james.f.juhas@snet.net writes:
>
> I understand that the heads used on MGA 1500 and 1600 engines are the
> same. Is there a difference in the head used on a 1959 Magnette?
> Also,
> can an MGB head be used on a 1500 or 1600 engine as a bolt-on option?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|