mgs
[Top] [All Lists]

Re: [Mgs] Radiator Pressure Testing

To: <mgs@autox.team.net>
Subject: Re: [Mgs] Radiator Pressure Testing
From: "Rick Brown" <mgrick@mgcars.org.uk>
Date: Tue, 28 Oct 2008 15:40:25 -0400
Bert

Why not just take it to a radiator shop and have them test it.  Most shops 
in the US will do this at no cost - I assume that shops in the Nederlands 
will do the same.

Groeje

Rick
Webmaster for:
___________________________________________________________
  http://www.mgcars.org.uk/namgbr  - The North American MGB Register
  http://www.mgcars.org.uk/mgcouncil -  North American Council of MG 
Registers
  http://www.britishcarclub.net - The Suncoast Classic MG Club and Nature 
Coast English Car Club
----- Original Message ----- 
From: "Bert Palte" <palte@gmx.net>
To: <mgs@autox.team.net>
Sent: Tuesday, October 28, 2008 15:23
Subject: [Mgs] Radiator Pressure Testing


> Dear fellow listers,
>
> I have a leak somewhere in the heater radiator
> or the heater valve of one of my other cars, a 1972 Sunbeam Sceptre.
>
> Were it an MGB, I would, of course, order new parts and exchange them, 
> [mandatory MG content] but for this car it is almost impossible to get new 
> parts and I have to resort to used items that I have had laying around for 
> many, many years...
>
> Fitting these under the dash, however, is a PITA so I would like to 
> pressure test them before fitting.
>
> Question: What pressure can I safely apply for radiator testing?
> I have compressed air @ 6 bar (~70 psi) at my disposal
> but I'm afraid that that will blow the radiator apart.
>
> Any recommendations anyone?
>
>
> Bert
> Holland, Europe
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>