Re: [Mgs] Engine Frustration Part II

[Mark J Bradakis <mark@bradakis.com>]

> The last main bearing by the transmission was seized.  Rest of the 
> bearings looked okay.
>

My inclination is to think that the bearing was not checked for proper
clearance during initial assembly.  Too tight, spins when cold and clamps
up as soon as it got warm.

mjb.
_______________________________________________

Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums