I found that I could not get a satisfactory adjustment that way - it
works but not 100%
At 03:47 AM 3/29/2010, Paul Hunt wrote:
>Don't you attach the cable to the unit before fitting the unit to
>the car then do the adjustment at the control end?
>
>----- Original Message -----
>>... One thing however, has not been mentioned and
>>that is adjusting the flap cables ! You have to do this through
>>that tiny hole while "inside" the cockpit. You have to slacken off
>>the nut, pull the flap to fully closed and then tighten.
>
Regards
Barrie
barrie@look.ca
(705) 721-9060
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|