78 and 105 mm, yes, here (on my spare alt).
There is an adjustment provided.
The bush you call a spacer can be shifted inside the alternator lug.
Don't use a hammer, however, you will break the lug.
I made a special tool to shift the bush.
I don't have any pics right now.
The idea is to put a piece of pipe just outside the bush and then use a bolt
and nut to exert force upon the bush.
Bert
-------- Original-Nachricht --------
> Datum: Fri, 16 Dec 2011 07:06:07 -0500
> Von: "davewillner" <davewillner at pa.net>
> An: mgs at autox.team.net
> Betreff: [Mgs] 1970 MGB alternator
> I purchased a replacement Lucas alternator a few weeks ago and found that
> even
> though it was listed for a 70, the brackets (hangers) did not fit my, what
> I
> believe are original, mounting brackets. The width of the alternator tabs
> (where the mounting bolts go) is 3 1/4" on the inside and 4 1/4" on the
> outside. Is this the correct width(s) for a 70? The rear "tab" has a small
> spacer attached to the outside sticking out maybe 1/4" - 3/8" also... Any
> advice would be appreciated, thanks
>
> Dave Willner
> Stroudsburg PA
> 59 TR3A
> 70 MGB
> 70 BSA 441 VS
>
--
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurC<ck-Garantie!
Jetzt informieren: http://www.gmx.net/de/go/freephone
|