Itâ??s easy enough to cobble oneâ??s own, using a quality turnbuckle
(rigging screw) from a marine supply source.
I question the need, though, as our dynamos have notoriously weak rear
bushings, and over-tightening the belt puts unnecessary strain on the bushings.
Bob
> On Jan 21, 2019, at 1:55 PM, Barney Gaylord via Mgs <mgs@autox.team.net>
> wrote:
>
> Yes. And it would be nice if it also works for an alternator convesion, and
> with the various assortment of different pulley sizes that were original on
> these cars.
>
>
> At 10:32 AM 1/21/2019, Barrie Robinson via Mgs wrote:
>> Hello folks, There is a strap that holds the generator up and allows
>> tensioning of the belt.Ã? Ã? Making any adjustments here is a pain as well
>> as inaccurate.Ã? Is anyone interested in a tensioner "strut" which allows
>> easy adjustments, even minute ones, using a spanner/wrench?
>
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/mgs
>
> Unsubscribe: http://autox.team.net/mailman/options/mgs/mgbobh@gmail.com
_______________________________________________
Mgs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/mgs
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|