I was able to get a puller from the parts store. Would the brackets for
the pump be the same if there was a short water pump or a long one?
Thanks tom in sc
-----Original Message-----
From: K Ohlgren [mailto:kjohlgren@hotmail.com]
Sent: Saturday, October 21, 2006 11:21 PM
To: tntcoop@earthlink.net; oletrucks@autox.team.net
Subject: RE: [oletrucks] power steering pump
Tom
a SBC pump is a SBC pump. the pulley is pressed on, most auto parts
places
will lend a puller installer to pull/install the pump.
Kurt
58 3100 Apache project
the "Duracell Project" it keeps going... and going...
>From: "Tom Cooper" <tntcoop@earthlink.net>
>Reply-To: "Tom Cooper" <tntcoop@earthlink.net>
>To: <oletrucks@autox.team.net>
>Subject: [oletrucks] power steering pump
>Date: Wed, 18 Oct 2006 06:26:14 -0400
>
>I have a power steering pump that possibly came off of a 305 that was
in
>the 81 Camaro that I used the front end from. My question is does
anyone
>know if the pump from a 305 and a 350 are the same?
>My main question is how does the pulley come off of the pump? I saw
>another pump and it looked like it may come off with a puller, but so
>far that hasn't worked very well. On the pump I have the shaft is
>threaded down the center and it looks like it is made for a allen head
>wrench. I will eventually get a new pump, I am using this one to mock
up
>my belts, pullys, and brackets.. Any pictures of a power steering pump
>and alternator on a 350 would be some help. Thanks for the help....
> Tom in SC
>
_________________________________________________________________
Get today's hot entertainment gossip
http://movies.msn.com/movies/hotgossip?icid=T002MSN03A07001
|