shop-talk
[Top] [All Lists]

Re: Shop Presses

To: LSAPEX@aol.com
Subject: Re: Shop Presses
From: "Jack L. Poller" <poller@chromatic.com>
Date: Tue, 29 Oct 1996 09:41:04 -0800
LSAPEX@aol.com wrote:
 
> << Do I need a 45 ton unit?  Or can I get by with a 20 ton unit?
> 
>   What about the working range? Anyone have any problems with the lower
>  end
>  of the working range? (like the ones rated 8.5" Minimum.) I would think
>  the
>  range needs a minimum of 0" (Lower end) to be more useful.
> 
>  What about the 'A' frame units compared to the regular square units?
> 
>  I'll be using the press mostly to remove bearings from axles or pressing
>  out
>  broken lug nuts from the hubs.  (I don't like the hammer method. <g>)
>   >>


The lower working range can be taken up by purchasing additional
arbor plates (each are 1" thick) or fabricating your own spacer/jig.

jlp

<Prev in Thread] Current Thread [Next in Thread>