shop-talk
[Top] [All Lists]

Re: HVLP Spray guns

To: nogera@juno.com
Subject: Re: HVLP Spray guns
From: Art Pfenninger <ch155@freenet.buffalo.edu>
Date: Fri, 20 Feb 1998 18:26:10 -0500 (EST)
I use a Craftsman 5 hp that only puts out 9.1 at 40 psi and 7.1 at 90psi.
When I went to by a spray gun I found that most of them required about 11
or 12 cfm. I talked to a number of "experts" at various stores and finally
gave up thinking I couldn't find a decent one. I borrowed a neighbors HVLP
gun that he bought from Harbor freight for $79 dollars. It required 12 cfm
at 70 psi. I decided to try it any way. Guess what NO PROBLEM. In addition
the HVLP guns use little paint that with the from the paint you can almost
pay for the gun. I bought a gallon and still have 1/2 of it left. One
quart would have been enough almost. The other benifit is that there is so
little overspray you hardly have to mask anything. Harbor freight has
several on sale now. One that looks good is usually $79 on sale for $69,
another which seems to be the same is on sale for $59 usually $69. CFM
requirement 2.8 to 8 at 15-50 psi. Both guns have a stainless steel needle
so you can use them with water based materials. The one I borrowed is on
sale for $74 usually $79.99. Have not used the previous two but can vouch
for this one.
...Art 

On Thu, 19 Feb 1998 nogera@juno.com wrote:

> I'm thinking of switching to a HVLP gun for use in my home shop.  I don't
> spray that often so I'd like to keep the cost down.  I've read that you
> have to have a  lot of air for these guns to operate. My little 2 hp
> compressor ( made when 2 HP was really 2 HP ) has worked well  for my
> needs ( other than with a DA sander ) and I really have no need for more
> volume.   
> Will the HVLP gun work on a compressor this small? 
> Any suggestions as to a Gun ?
> 
> Thanks  
> 
> Bob Nogueira 
> 
> _____________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com
> Or call Juno at (800) 654-JUNO [654-5866]
> 
> 


<Prev in Thread] Current Thread [Next in Thread>