----- Original Message -----
From: "Allen Wulf" <wulfmgbv8@attbi.com>
To: "Bullwinkle" <yd3@nvc.net>; "'Shop-Talk'" <shop-talk@autox.team.net>
Sent: Saturday, February 02, 2002 7:24 PM
Subject: Re: Inflatable Spare:
> Blake,
> Good point. I would only add that there are probably no unrepairable Twin
> Cam Wheels.
>
> Al
> ----- Original Message -----
> From: "Bullwinkle" <yd3@nvc.net>
> To: "'Shop-Talk'" <shop-talk@autox.team.net>
> Sent: Saturday, February 02, 2002 10:04 AM
> Subject: Re: Inflatable Spare:
>
>
> >
> > Larry:
> >
> > <<<snip>>>
> > I did all this to gain some trunk space.
> > <<<snip>>>
> > That's what I want to do.
> >
> > <<<snip>>>
> > I had them weld a spline drive hub to a center, which they welded to a
> > space saver rim; I also had them change the offset.
> > <<<snip>>>
> > A good idea, but twin cams don't use spline drive hubs. They use a peg
> > drive hub along with the knock off. So now the problem is locating a
> > unrepairable twin cam wheel that has a good center section.
> >
> > Blake
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|