shop-talk
[Top] [All Lists]

Re: tractor rec's

To: shop-talk@autox.team.net
Subject: Re: tractor rec's
From: Dave Williams <ronin@aristotle.net>
Date: Sat, 16 Mar 2002 02:23:42 -0600
Paul F Mele wrote:

> Any thoughts out there on something worthwhile (used) for around $1500 -
> 2000?

 That's going to be an entirely local thing.  However, if you plan to
buy or borrow attachments for the three-point, you need to be aware that
the PTO drives on older equipment are *not* all the same.  My Dad bought
a small International Harvester tractor in primo condition at a good
price, then found out that though standard-size attachments would fit
the three-point, the PTO

  A) had a smaller than standard spline
  B) turned in the opposite direction from normal
  C) turned at about half the RPM of normal

 We found (C) out after buying a spline adapter and reversing the blades
in his brand-new mower deck.  Didn't work worth flip at half speed.

 He bought a larger '50s Massey-Ferguson that would work with normal
attachments, but kept the IH for stuff that didn't require a PTO drive.

 Most tractors had fairly loose steering to start with; half a turn of
slack isn't all that unusual after 40 or 50 years, but it doesn't make a
whole lot of difference in most cases.  Make sure the brakes and the
three-point lift work.
Parts for half-century-old Ford, Massey, Case, IH, Deere, Oliver, etc.
are easier to find than parts for cars that old.  There are a couple of
very active tractor mailing lists; I don't have the current addresses
for them.  Tires are no more expensive than high-end car tires.  Avoid
British Leyland if you're in the USA; they're orphans.  A friend's
engine shop got one in for a rebuild, and the owner nearly had a stroke
when he found out replacement pistons were $226 each, and there were
several bits that were apparently unobtainium.

 I'd avoid anything with transmission problems.  Brake replacement can
be a pain in the ass with some models, but you might have to consider it
in your price range.

 You can get trailer ball adaptors for the three-point and use the
tractor to move your utility or car trailer around, and you can of
course use the tractor to move your collection of non-running cars
around.  A friend made a tripod boom out of pipe that attaches to the
three-point; he uses it like a cherry picker to lift and carry engines,
etc.  

-- 
==NEW: ronin@aristotle.net===========================================
I've got a secret / I've been hiding / under my skin / | Who are you?
my heart is human / my blood is boiling / my brain IBM |   who, who?
============================== http://angelfire.com/ar/dw42/index.htm

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>