shop-talk
[Top] [All Lists]

RE: solid fill wheels

To: "'Eric Petrevich'" <eric@megageek.com>, shop-talk@autox.team.net
Subject: RE: solid fill wheels
From: Gil Fuqua <gil.fuqua@cci-ir.com>
Date: Mon, 6 May 2002 08:12:52 -0500
I had the front tires on my mower filled with a foam that hardens.  It's
what the commercial lawn mower guys use around here to eliminate flats.  It
makes the tires heavy and indestructible.  The only way to get the tire off
is to cut it off with a saw.

You might ask some commercial lawn guys in your area about a supplier.

Gil Fuqua

Nashville.

-----Original Message-----
From: Eric Petrevich [mailto:eric@megageek.com]
Sent: Sunday, May 05, 2002 7:54 AM
To: shop-talk@autox.team.net
Subject: solid fill wheels



I have a bunch of odd size wheels that need new tubes.  Here is my 
question...

Is there anyway I can fill the tire so that they are non-pnumatic?  I 
would much rather have solid wheels than air filled.

The tires are for things like the York rake, mower decks, extra.  Smooth 
ride does not matter.  I also would love to fill the front tires on the 
loader/backhoe but it's not as critical as the other ones.

If not, is there a good source for inner tubes for small wheels someplace?

TIA

Inch

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>