[Top] [All Lists]

Re: Blast Cabinet Question: How Tall?

To:, Shop-Talk Talk <>
Subject: Re: Blast Cabinet Question: How Tall?
From: Mike Rambour <>
Date: Tue, 14 Feb 2006 14:16:58 -0800
    Its all comfort and where you want it to be.  I am 5'8" and the 
arm hole is a 8" hole with the bottom of it at 40" from the 
ground.  That is approx. 2 1/2" above the grate inside the blasting 
cabinet.  It was my first time building something like this and if I 
built it again, I would again make the same height, either it is 
comfortable for me or I have grown used to it.


At 10:51 AM 2/14/2006, wrote:

>I am mostly finished with my project of building a blasting cabinet 
>from TP Tools' parts kit
>and plans, and I am to the point where I have to cut the legs.
>Does anybody have any advice on how high the glove holes should be?  It seems
>like they ought to be a little bit higher than elbow-height, but 
>since I have no experience
>actually using a cabinet, I cannot say for sure...

Mike Rambour
Bug Writer err...Programmer
If you want to learn more about the ULTIMATE BRITISH sports car,
then take a look at

<Prev in Thread] Current Thread [Next in Thread>