Machinery's Handbook has EVERYTHING you need.
http://www.amazon.com/Machinerys-Handbook-Toolbox/dp/0831128003/ref=pd_bbs_sr_1?ie=UTF8&s=books&qid=1208114376&sr=8-1
However, you don't need the latest and greatest; find a used copy an
edition or two back and save quite a bit of money.
A second choice would be Mark's Standard Handbook for Mechanical
Engineers. I have them both, but my copy of Machinery's (24th
edition) is the one that stays out in the shop.
Dave C
At 04:04 AM 4/13/2008, Dan and Jenny Fest (Coles Nurseries Inc) wrote:
>I am interested in learning more about different grades of steel and
>fasteners. My goal is to eventually own a milling machine and be knowledgable
>able which grade of steel to use and why. Also, steel additives i.e. nickel
>etc. and the advantages/disadvantages of each. Same with fasteners i.e. why
>grade 8 - advantages and disadvantages. Let me know if you have any
>suggestions for a book to purchase or website to visit.
>Thanks,
>Dan
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as cavanadd@verizon.net
>
>Shop-talk mailing list
>
>http://autox.team.net/mailman/listinfo/shop-talk
>
>http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|