When I was a kid mowing yards, I used a hand file. I grinder sounds
like it would work fine.
On Sat, Sep 13, 2008 at 9:08 PM, Eric J Russell <ejrussell@mebtel.net> wrote:
> I use an attachment for a Dremel tool for touch-up sharpening. Your
> description sounds like it needs more than a bit of touch up. Remove
> the blade and use a bench grinder. Or bring it back to Home Despot and
> insist you want a sharp blade.
--
Patton Dickson - http://Austin-Healeys.com - Plano, TX
1957 Austin-Healey 100-Six "Built to run 'til the road wears out."
1977 Newport '28
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|