shop-talk
[Top] [All Lists]

Re: [Shop-talk] adhesives.........

To: Shop Talk <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] adhesives.........
From: "Chadwick E. Labno" <clab@bellsouth.net>
Date: Wed, 01 Apr 2009 14:08:33 -0400
I've always had good luck with Loctite products:

http://www.loctiteproducts.com/glue.asp

Also, take a look at:

http://www.thistothat.com

chad




>
>
>
> I'm attaching some light metal pieces to 
> thick leather. Afterwards the backside of the 
> leather will not be accessible. I'm using a brad 
> with a push nut. See here: 
> http://www.mcmaster.com/#push-nuts/=198uxq 
> it is very small (1/16" shaft on the brad). After 
> installation, I clip the end of the brad as close to 
> the Push Nut as possible so that the leather will 
> be near flat when finished. 
>
> Before closing the backside I'm thinking, for extra 
> security, to add some sort of adhesive. I have 
> hundreds of these to do, so I'm also looking to 
> keeping it simple. 
> My question is: what type of adhesive would best 
> assure no movement of the Push Nut. I cannot afford to 
> have it come loose. What I'm effectively trying to 
> do is lock the Push Nut on the shaft of the brad. 
> Any suggestions? 
>
> Steve Hammatt 
> Mount Vernon WA USA 
> _______________________________________________ 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>