shop-talk
[Top] [All Lists]

Re: [Shop-talk] Epoxy/JB Weld on auto a/c line?

To: Steven Trovato <strovato@optonline.net>
Subject: Re: [Shop-talk] Epoxy/JB Weld on auto a/c line?
From: "Elton E. (Tony) Clark" <eltonclark@gmail.com>
Date: Mon, 6 Jun 2011 15:32:22 -0500
*JB weld, a small square of beer can and a good hose clamp . . think this
way:  the pressure may be high but you're dealing with a .002" hole so the
effective pressure will only be*
*.002 of high pressure Per Square Inch.  .002ths of 500 PSI is only  about a
pound!
*
*(Ducking for cover)*

*Tony*
*

*
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>