shop-talk
[Top] [All Lists]

Re: [Shop-talk] stripped screw hole in carb

To: "David C." <cavanadd@frontier.com>
Subject: Re: [Shop-talk] stripped screw hole in carb
From: "Elton E. (Tony) Clark" <eltonclark@gmail.com>
Date: Sun, 19 Jun 2011 18:55:21 -0500
*Free advice and worth every penny:*
*I'd take that carburetor body to a cycle or outboard shop where they do
helicoils all the time and install all five . . you get a strong repair, you
will retain the original look with original screws, you won't have to drill
out the holes in the top like you would for bigger screws, no stress on your
part, what's not to like, it's only money?!?!*
*Tony - often wrong but always positive *
*

*
On Sun, Jun 19, 2011 at 1:59 PM, David C. <cavanadd@frontier.com> wrote:

> I'll throw in another recommendation for some sort of insert or rethreading
> one size up.  I have used JB Weld a lot, and while it's good as a filler and
> in compression, my results with it in shear or tension have not been good at
> all.
>
> John T. Blair wrote:
>
>>  I'm working on a '40 Packard's carb.  The float bowl cover is held on
>> with 5
>> screws. 3 of the holes (in the bottom part of the carb - float bowl) are
>> stripped.
>>
>> So I'm looking for an easy way to fix them.
>>
>> I've done a google search, and found 2 basic methods:
>>
>> 1. use a heli coil
>>
>> 2. us JB weld with soap on the bolt. Once the epoxy has cured, unscrew
>> the screw.
>>
>> Wondering what you guys have done?
>>
>> John
>>
>> John T. Blair WA4OHZ email: jblair1948@cox.net
>> Va. Beach, Va
>> Phone: (757) 495-8229
>>
>> 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
>> 75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
>> 65 Rambler Classic
>>
>> Morgan: www.team.net/www/morgan
>> Bricklin: www.bricklin.org
>>
>> If you can read this - Thank a teacher!
>> If you are reading it in English - Thank a Vet!!
>> ______________________________**_________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> 
>http://autox.team.net/mailman/**options/shop-talk/cavanadd@**frontier.com<http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com>
>>
>  ______________________________**_________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> 
>options/shop-talk/eltonclark@**gmail.com<http://autox.team.net/mailman/options/shop-talk/eltonclark@gmail.com>
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>