Re: [Shop-talk] [Spits] master brake

[Doug Braun <doug@dougbraun.com>]

The seal is sort of dodgy: A flat part of the metal M/C presses against a
flat part of the plastic reservoir, and there is a
flat rubber washer between them.  Given how much a new one costs, I would
try some sort of sealant like hylomar or silicone
first.

Doug

On Fri, May 25, 2012 at 9:18 PM, Dave <dave@ranteer.com> wrote:

> I believe the master brake reservoir is leaking between the plastic and the
> metal.  can I take it apart and put in a gasket or something?  or should I
> replace/rebuild the whole assembly?
> _______________________________________________
>
> Spitfires@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spitfires/doug@dougbraun.com
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net