shop-talk
[Top] [All Lists]

Re: [Shop-talk] back up camera wiring help

To: "John Innis" <jdinnis@gmail.com>, "shop-talk" <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] back up camera wiring help
From: "john niolon" <jniolon@att.net>
Date: Tue, 19 May 2015 11:59:41 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <58A0DCBF43FF499A9F2E2DEDD0C0C3F6@UserPC> <CANuE7YBq4OEz9vaKcAwDaONGr9mABwPe_3wBz1=PLaJ7VGsXhA@mail.gmail.com>
    thanks for the reply John.... sounds like ours are similar... I get no
video on either V1 or V2   just this silly flashing screen.... also the menu
button doesnbt work either... seems odd Ibd get two bad monitors in a
row...

still looking for answers


From: John Innis
Sent: Monday, May 18, 2015 5:00 PM
To: john niolon
Cc: shop-talk
Subject: Re: [Shop-talk] back up camera wiring help

Not sure if yours is the same, but mine automatically selects V1 when the Blue
Wire is OPEN and V2 when the blue wire has +12 V.  I hooked mine up to a DPDT
switch with a center off position so I could have ON-OFF-AUTO.  The Blue wire
is hooked up to the common terminal of them switch, the Reverse lights are on
one leg and a +12 constant source on the other leg.  I really like being able
to flip it on any any time I want while pulling the trailer.


On Mon, May 18, 2015 at 4:43 PM, john niolon <jniolon@att.net> wrote:

  Hi guys..

  bought an E-bay special backup camera system for my Suburban...  wonb t be
  installed permanently but used in different vehicles to hook up trailers.
  Will fab a bracket to hang the camera over the tailgate and the monitor
will
  be in the cab.

  there is a 7b  monitor with a red/black for 12 volts  and two video feed
  lines for V1 and V2.   and a Blue wire they tell me to hook up to the back
up
  light.
  there is a camera with a red/black  for 121 volts and a video o/p cable
that
  goes to V1 or V2 on the monitor.

  Ib m assuming the blue wire is a trigger to turn on the camera when
  backing... but I want it on all the time so I assumed to hook it up to
12volt
  source.

  all I get when hooking up as above is a white light flashing on the monitor
  and no video at all   Ib ve tried it with and without the blue wire, blue
  wire to ground and blue wire to 12volt +

  nothing works..... any backinup gurus out there ???

  I can email a sketch of wiring if anyone wants it

  thanks
  John
  _______________________________________________

  Shop-talk@autox.team.net
  Donate: http://www.team.net/donate.html
  Suggested annual donation  $12.96
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums
  Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/jdinnis@gmail.com





--

=================================
= Never offend people with style when you   =
= can offend with substance --- Sam Brown  =
=================================
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>