I received no response to my previous email, so I thought I would post
it again.
Maybe someone has a manual with the layout of the following?
The Question is on Emission hoses to the carbon canistor. This is a 74.
Current Hose routing:
1. Hose off valve cover is TEE'd to the Right side of Carb and to
the Top Center of Canistor.
2. Top Back of Canistor goes back to Gas Tank
3. Top Front of Canistor goes to Front left Carb
4. Bottom of Canistor goes to center of Intake just behind the carb.
5. I don't have an anti run on valve, but did find the 2 wires
dangling
6. Rear intake (cyl 3&4) goes to a hose which has been plugged
7. There is a vacuum port on the top rear of carb that has been
plugged.
Does anyone know the correct configuration?
I'll post some pictures of it and give a description of work done on
my Web page this week.
Thanks for your input.
Pat
63 Spitfire
74 Spitfire
68 Chevy C10
|