Found the problem, the flexible coupling has ALL the slop.
I looked at the Haynes and it gave a very little detail on how to remove it.
By what I saw, the inside coupling must be removed as well as the one just
in front of the coupling.
After this a (PULL ?) on the shaft will give a enough room to get the
coupling out ?
-----Original Message-----
From: Douglas Braun & Nadia Papakonstantinou [mailto:doug@dougbraun.com]
Sent: Friday, April 20, 2001 3:13 PM
To: Craig Smith
Subject: Re: Steering Slop
I bet taking apart the rack and turning the pinion 180 degrees
would also help. Then a relatively unworn part of the
pinion would be engaged with the rack when you are not turning.
But I have never had to mess with my rack, fortunately.
Doug Braun
'72 Spit
At 03:34 PM 4/20/01 , you wrote:
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|