Hi James,
Puting the needles in is a sinch, take out the piston (as you have already done
once) and undo the screw on the side, by the needle. Pull out the old one
(Which will have a tiny spring on it that will need swapping) and put in the
new..
Only thing you need to be sure of is that the shoulder on the need is flush
with the bottom of the piston!
Cheers
Tim
--
Tim Dafforn
University of Cambridge
Structural Medicine Unit
Cambridge Institute for Medical Research
Hills Rd, Cambridge CB2 2XY.
UK
Tel. (01223) 763230
Fax. (01223) 336827
http://smokeroom.cimr.cam.ac.uk/
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|