I just finished posting it all on a web page~
...haven't gotten to the rods yet
Paul Tegler firstname.lastname@example.org www.teglerizer.com
----- Original Message -----
From: "Carter Shore" <email@example.com>
To: "Paul Tegler" <firstname.lastname@example.org>; <email@example.com>; "CARS
Spitfires@Autox. Team. Net (E-mail)" <firstname.lastname@example.org>;
Sent: Wednesday, November 14, 2001 9:09 AM
Subject: [spitfire-enthusiast] Re: piston wieghts and balancing
Out of curiousity, what are your piston assembly and
rod assembly weights?
I'm seeing around 400g for the pistons, and 750g for
--- Paul Tegler <email@example.com> wrote:
> 0.5 grams is suppose to be the optimum
> balance weight between pistons (plus pins plus
> WITHOUT TOUCHING THE NEW SET HERE
> If I swap two gudgeon pins all four are within +/-
> 0.7 grams
> The pins vary the most.
> (rings vary by 0.07 grams)
> Is this getting picky... Should I leave well enough
> The new pins weigh 99 grams. the old ones 92 grams
> Both are round, clean and true to 0.002"
> Both new and old pins ..you can just perceive a
> wobble of the pin in the bushing.
> Paul Tegler firstname.lastname@example.org
Find the one for you at Yahoo! Personals
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
/// email@example.com mailing list
/// or try http://www.team.net/cgi-bin/majorcool