Philip, you can get a very large Hex Key (I forget the size but it should be
easy enough to measure) but probably will find little other use for it. The
last time I did this, I used the head of a same size bolt, double nutted it
to give a turning surface, and backed it out with a wrench on the inner nut.
Cheers
Keith
----- Original Message -----
From: "Philip Warburton" <cplimey@shaw.ca>
To: "SPIT mail list" <spitfires@autox.team.net>
Sent: Monday, August 26, 2002 1:38 AM
Subject: Tipping Valve (brake query)
> On my 75 brake M/C, it has a thing called a tipping valve in it that is
held
> in place by a hex nut that requires removal by an internal tool rather
than
> an external one.
> What I mean by this is that the "instrument of removal" fits into the nut
> and the threads are on the out side of the nut.
>
> If anyone is still following at this point, where can I get this tool
ond/or
> how can I remove it without destroying it with what I may have in the tool
> box??
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|