Remove the moulding first and, from the inside, to push the inside rubber lip
over the flange with the screw driver while applying some pressure onto the
glass.
To make it easy you can some liquid soap as a lubricant. It's laminated glass,
so be careful.
Cheers
Liv
----- Original Message -----
From: David Mayer
To: spitfires@autox.team.net
Sent: Friday, December 16, 2005 5:45 PM
Subject: Windshield removal
Hello all,
I am planning on removing my windshield this weekend. I am assuming that
it is pretty straight forward but i just wanted to know if there are any
tips for getting it out without dropping it. Any Advise?
Thanks,
Dave
'68 Spit MKIII
Your messages not reaching the list?
Check
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|