I am replacing the hoses on my 80 Spitfire. There is a hose that goes
from the water return pipe to the intake manifold pipe. The hose is
1/2" id which works on the manifold pipe but is a little too big for the
water return pipe. It seems the return pipe must be about 7/16" Has
anyone else run into this?
Does anyone make a better fitting one? ( I got mine from Vickie B) Do I
just clamp it down?
Thanks,
Roger Elliott
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|