Post-rebuild Time:
Just got the 72 1275 back together and static timed,
finally. Thanks to all who suggested ways to find #1.
Had it all the time.
Just got the last wire connected, put in the oil, and kicked
it over! By Gawd, she runs.
I think the only real bug now is the clutch system. I have
filled the master cylinder and connected the bicycle pump.
When I pump with the bleed screw open, I get barely a trickle
out of the bleeder. I disconnected the line from the MC doen to
the Rivergate connector to the Datson (or whatever?) slave
cylinder. Theres plenty fluid in the line that far. I assume
there must be some obstruction from the connector thru the
slave cylinder. Suggestions?
chuck
9n
b
--
=====================================================
chuck ciaffone chuckc@ibm.net
|