spridgets
[Top] [All Lists]

Re: She Runs !

To: Chuck Ciaffone <chuckc@ibm.net>
Subject: Re: She Runs !
From: Ulix Goettsch <ulix@u.washington.edu>
Date: Tue, 16 Dec 1997 10:43:31 -0800 (PST)
Cc: spridgets@Autox.Team.Net
In-reply-to: <3496B70B.CC7@ibm.net>
Reply-to: Ulix Goettsch <ulix@u.washington.edu>
Sender: owner-spridgets@Autox.Team.Net
You need MORE PRESSURE!!!  It took a foot pump operated by hand with full
force to bleed my Rivergate cyclinder.

"Scotty, I need that pressure NOW!"

Ulix


On Tue, 16 Dec 1997, Chuck Ciaffone wrote:

> Post-rebuild Time:
> 
> Just got the 72 1275 back together and static timed,
> finally.  Thanks to all who suggested ways to find #1.
> Had it all the time.
> 
> Just got the last wire connected, put in the oil, and kicked
> it over! By Gawd, she runs. 
> 
> I think the only real bug now is the clutch system. I have
> filled the master cylinder and connected the bicycle pump.
> When I pump with the bleed screw open, I get barely a trickle
> out of the bleeder. I disconnected the line from the MC doen to
> the Rivergate connector to the Datson (or whatever?) slave
> cylinder.  Theres plenty fluid in the line that far. I assume
> there must be some obstruction from the connector thru the
> slave cylinder. Suggestions?
> 
> chuck 
> 9n
> 
> b
> -- 
> =====================================================
> 
> chuck ciaffone chuckc@ibm.net
> 

    Ulix                                                    __/__,__        
.......................................................... (_o____o_)....
                                                           '67 Sprite


<Prev in Thread] Current Thread [Next in Thread>