Larry and Sandi Miller wrote:
converted message below
> Looking into the foot well. Right hole is 1.535 " from the front wall and
> 2.125"
> from the frame on the right. Left hole is 2.086 " from the front wall and
> 2.874 " from the frame on the right. Measurements are to the center of the
> hole.
>
> Larry Miller
> -----Original Message-----
> From: Rick / Carolyn Walters <walters@mail.softcom.net>
> To: Dave Woerpel <dwoerpel@wi.net>
> Cc: Spridget List <spridgets@Autox.Team.Net>
> Date: Friday, December 26, 1997 6:17 PM
> Subject: Re: Throttle pedal
>
> Hi Dave,
>
> I went out to get the measurements you wanted, only to find that I don't
> have any holes in mine either. Puddles is still under construction so
> the P.O must have replaced the floor boards? Let me know what you find
> out, thanks.
>
> Rick
>
> 52 MGTD, 74 B, 76 XJ12C (Wife's), & Puddles (60 Frogeye)
>
> http://www.softcom.net/users/walters
>
> Dave Woerpel wrote:
> >
> > Happy Holidays Listers!
> >
> > Now that I'm somewhat recovered from overeating and wanting to take
> > advantage of my son being home from college, I have a question.
> >
> > I replaced the Bugeye's floorpans and they don't have holes for the
> > throttle pedal mount.
> > On the Bugeye the pedal is mounted to the floor by two bolts. Is there
> > anyone willing to get down on their hands and knees and measure the
> > position of the holes (bolt heads) from the toe-board and the
> > transmission tunnel ( that would give me dimensions 90° apart. Watch
> > out for the steering wheel on the way in and out!!! I've learned to
> > renove the steering wheel for this job. :)
> > Thanks in advance!
> > Dave Woerpel
> > '59 Bugeye 17606
|