spridgets
[Top] [All Lists]

RE: Thank you people!

To: Chris Kotting <ckotting@iwaynet.net>
Subject: RE: Thank you people!
From: Ulix Goettsch <ulix@u.washington.edu>
Date: Thu, 26 Feb 1998 09:17:23 -0800 (PST)
Cc: "spridgets@autox.team.net" <spridgets@Autox.Team.Net>
In-reply-to: <01BD428F.C89B0100.ckotting@iwaynet.net>
Reply-to: Ulix Goettsch <ulix@u.washington.edu>
Sender: owner-spridgets@Autox.Team.Net
I just filled my diff last weekend.  If you buy two quarts of oil in the
standard bottles with the pointed spout, you can do it with no other
gimmicks.  Start squeezing it in, you only get the bottle about half
empty.  Then use the second bottle until it is half empty and pour the
remainder back into the first bottle.  This one is now full enough to
complete the operation.

Ulix (freshly lubed rear end)
Wait, I think I used the sig file for the wrong list...too late (^x)





On Thu, 26 Feb 1998, Chris Kotting wrote:

> Evangelos -
> 
> To refill my diff & tranny, I got one container of 80-90 with a nozzle.  I 
> fitted a length of plastic tubing to the nozzle, tucked the other end into 
> the filler hole, hung the bottle upside down, and punched a hole in the 
> bottom of the bottle.  Then I went about doing other things, checking the 
> bottle and the transmission periodically.  It's slow, but if you're busy 
> with other stuff, patience is not a problem.  When the bottle was empty, I 
> refilled it from the other container through the hole.  When the tranny was 
> full, I clamped off the tube, and moved the whole apparatus to the diff.
> 
> Somewhere, I have a picture captioned "Midget Hospital" with my Midget up 
> on stands, and what looks for all the world like an IV line filled with 
> Castrol 80W-90!  <grin>
> 
> Chris Kotting
> ckotting@iwaynet.net
> 
> 

    Ulix                                                    __/__,__        
.......................................................... (_o____o_)....
                                                           '67 Sprite


<Prev in Thread] Current Thread [Next in Thread>