-----Original Message-----
From: carolien coulter <carolien@coastalnet.com>
To: Jeff Church <jchurch@exis.net>
Date: Sunday, April 26, 1998 5:59 PM
Subject: Re: facia mounting
>
>-----Original Message-----
>From: Jeff Church <jchurch@exis.net>
>To: carolien coulter <carolien@coastalnet.com>
>Date: Sunday, April 26, 1998 1:01 PM
>Subject: Re: facia mounting
>
>Jeff,
>
>
>>You know, your fix sounds familar. Does it flash very quickly?
>>I didn't really notice, However now the light stays on steady also when
the
>turn signal light switch is off??
>
>>BTW, did you locate the two holes on the bottom of the facia and on the
lip
>>of the heater plenum?
>>yes I did on the facia, but one seems a little big. On the heater plenum I
>couldn't find one but we did a lot of bodywork in that area and they
>probably just got filled
>
>>We go through that neck of the woods on our way down to Morehead City. I
>>thought Oriental sounded familar too!
>>
>>Jeff
>>
>>-----Original Message-----
>>From: carolien coulter <carolien@coastalnet.com>
>>To: Jeff Church <jchurch@exis.net>
>>Date: Sunday, April 26, 1998 12:53 PM
>>Subject: Re: facia mounting
>>
>>
>>>
>>>-----Original Message-----
>>>From: Jeff Church <jchurch@exis.net>
>>>To: carolien coulter <carolien@coastalnet.com>
>>>Date: Sunday, April 26, 1998 12:45 PM
>>>Subject: Re: facia mounting
>>>
>>>
>>>>Carol,
>>>>My Bug was missing those two stays. I made them out of aluminium flat
>>>>stock. They bolt onto the bottom lip of the facia (you'll find the
>holes)
>>>>directly below the choke knob on the left and the starter knob on the
>>>right.
>>>>The other end of the stays attach to the small lip of the heater box
>>plenum
>>>>(forward of the gearshift). They make an amazing difference to the
>>>rigidity
>>>>of the facia.
>>>>
>>>>Regarding your turn signal indicator, I had the same problem. I got
mine
>>>to
>>>>work, unfortunately, I don't remember how I did it.
>>>>
>>>>Jeff Church
>>>>Chesapeake, VA
>>>>AN5L 11627
>>>>
>>>>P.S. Where is Oriental?? I'm originally from the Fayetteville area
>>(Spring
>>>>Lake, to be exact).
>>>>
>>>>-----Original Message-----
>>>>From: carolien coulter <carolien@coastalnet.com>
>>>>To: spridgets@autox.team.net <spridgets@autox.team.net>
>>>>Date: Saturday, April 25, 1998 6:04 PM
>>>>Subject: facia mounting
>>>>
>>>>
>>>>>hi everyone,
>>>>>There was a string on this a while back, however I can't remember
>exactly
>>>>>what it said. Anyway, I have 2 brackets, that go on the facia
>>>somewhere,but
>>>>>I can't figure out where. Because of all the bodywork there are no
>>>>>screwholes or anything else helpful like that.Does anybody remember ??
>>>>>Thanks, Carol Oriental NC
>>>>>
>>>>
>>>>Hi Jeff,
>>>Thanks for your repoly. Oriental is about 35 miles from New Bern on the
>>>Neuse river. Across the river from Cherry Point actually. I just got my
>>>flasher unit to work, but not how it is supposed to according to the
book.
>>>When I hook the light green wire on the same post as the green and brown
>on
>>>the flasher unit ( green and brown comes off the turn switch) the light
>>>works as it s supposed to. Go figure-Carol.
>>>
>>
>>
>
|