spridgets
[Top] [All Lists]

Re: split gauge

To: Mark van der Linden <MARK.VANDERLINDEN@ey.com>
Subject: Re: split gauge
From: hello39@idt.net
Date: Fri, 26 Jun 1998 13:37:21 -0400
Cc: carlson@navtech.com, spridgets@Autox.Team.Net
References: <199806261605.MAA29541@gateway2.ey.com>
Reply-to: hello39@idt.net
Sender: owner-spridgets@Autox.Team.Net
Any more of this stuff and my hats won't fit anymore!
Thanks
Alan

Mark van der Linden wrote:

> Curt:
>
> I am very interested in that article, and was wondering if you could maybe 
>provide it to me (by fax or so).
> I will be in the office until July 2nd, and if you maybe would be able to get 
>it to me prior to that date, I can
>  have the document scanned and attach it to an email to be send out on 
>spridgets@Autox.Team.Net@Internet.
> My fax number is: (312) 879 4685.
>
> As regard to the places to mount I can suggest a webpage: 
>http://members.xoom.com/spridget/alan.html
> Alan Fisher has manufactured a console that fits nicely in the Sprite and 
>that leaves room for gauges, radio,
> clocks etc. For the interested, he also has wingwindows for the cars. I spoke 
>to Alan a number of times and
> he is really a helpful person who gave me a lot of tips. I also ordered the 
>console (yesterday) and hope to
> receive it next week. There are some pictures on the webpage if you want to 
>see what it looks like.
>
> Good luck,
>
> Mark van der Linden
> '69 Sprite
>
> Curtis Carlson wrote:
> >
> > Fellow Spridgeteers!
> >
> > A while back, I read an article in British Car magazine about adding some
> > supplemental gauges to our LBC's.  I think it was called: "What Lucas
> doesn't
> > tell you".  It described how to add an ammeter, voltmeter, and clock to a
> big
> > Healey.
> >
> > I'd like to do this to my Sprite, but don't want to cut a hole in my dash,
> or
> > add one of those ugly under-dash engine mounts.  I figure I have room for
> one
> > hole in my radio console on the tranny tunnel.
> >
> > Does anyone know of anyone who makes a combination (split) gauge similar to
> the
> > oil pressure/water temperature gauge, but shows amps/volts.  One of those
> would
> > be pretty helpful, and if I could find a black face, it would complement the
> > rest of my gauges nicely.
> >
> > Thanks.
> >
> > Curt 'n Gert




<Prev in Thread] Current Thread [Next in Thread>