spridgets
[Top] [All Lists]

Re: Bugeye Front-Hinging Hood

To: "Peter Samaroo" <mrbugeye@hotmail.com>, <mayfam@sprynet.com>, <spridgets@Autox.Team.Net>, <millerls@msn.com>
Subject: Re: Bugeye Front-Hinging Hood
From: "Larry and Sandi Miller" <millerls@email.msn.com>
Date: Thu, 20 Aug 1998 07:54:47 -0700
Reply-to: "Larry and Sandi Miller" <millerls@email.msn.com>
Sender: owner-spridgets@Autox.Team.Net
Hi Peter

I also have thought about fitting a Spitfire type latch but It's now too
late for this car. The car goes to the painter this weekend so no more
tinkering with the bonnet. I used the rubber type latches mounted on the
side because the glass wings need to be held in. If you do try to fit
Spitfire type latches, record the details for the list.

Larry
-----Original Message-----
From: Peter Samaroo <mrbugeye@hotmail.com>
To: mayfam@sprynet.com <mayfam@sprynet.com>; spridgets@Autox.Team.Net
<spridgets@Autox.Team.Net>; millerls@msn.com <millerls@msn.com>
Date: 20 August, 1998 6:30 AM
Subject: Re: Bugeye Front-Hinging Hood


>I also have the kit from mini-mania if you have access to the steel and
>a welder you could probably duplicate for about $20 for the material.
>The kit does not include any way of latching the bonnet so you will have
>to devise some way of doing so. Either straps or bungies at the back or
>fitting some kind of latches. I am toying with the idea of spitfire type
>latches mounted on the inner footwell I just need to find a spitfire
>abandoned in a parking lot..
>
>>From: "Larry and Sandi Miller" <millerls@msn.com>
>>To: "Daryl May" <mayfam@sprynet.com>, <spridgets@Autox.Team.Net>
>>Subject: Re: Bugeye Front-Hinging Hood
>>Date: Wed, 19 Aug 1998 22:11:58 -0700
>>Reply-To: "Larry and Sandi Miller" <millerls@msn.com>
>>
>>You can buy a kit from Mini Mania for about $100. I used it on the
>Bugeye
>>that I'm building. The only bad thing is that you have to lose the
>front
>>bumper. I could probably find the plans and fax them too you if you
>want to
>>try and make your own.
>>
>>Larry Miller
>>
>>-----Original Message-----
>>From: Daryl May <mayfam@sprynet.com>
>>To: spridgets@Autox.Team.Net <spridgets@Autox.Team.Net>
>>Date: Wednesday, August 19, 1998 8:07 PM
>>Subject: Bugeye Front-Hinging Hood
>>
>>
>>>Does anyone have any plans for the parts that you'd need to make a
>Bugeye
>>>hood hinge in the front?
>>>
>>>Is this a good thing to do anyway?
>>>
>>>Thanks,
>>>
>>>Daryl
>>>
>>>
>>
>>
>>
>>
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>




<Prev in Thread] Current Thread [Next in Thread>