[Top] [All Lists]

Re: Dual circuit master cylinder interchangeability

To: "Richard D. Arnold" <richard.arnold@juno.com>
Subject: Re: Dual circuit master cylinder interchangeability
From: Scott & Glenda Meyers <autox@earthlink.net>
Date: Mon, 07 Sep 1998 07:34:26 -0700
Cc: List Spridgets <spridgets@Autox.Team.Net>
References: <00eb01bdd9a0$59ef6d60$552c6420@default> <19980907.075446.5183.5.richard.arnold@juno.com>
Reply-to: Scott & Glenda Meyers <autox@earthlink.net>
Sender: owner-spridgets@Autox.Team.Net

Richard D. Arnold wrote:

> So, is this correct -- can a MGB dual-circuit be used on a Midget?  I've
> never compared the two side-by-side but recall that they appear similar
> in size and mounting.  If the mounting is the same, what would the
> differences be, and what problems might one encounter?

I'd compare part numbers from a catlogue - if the same, then no
differences, and should be OK to use.

If the number varies at all, then many factors come into play - dimensions,
size of the internal pistons, etc, and I would not go there.

Scott Meyers
60 Bugeye

<Prev in Thread] Current Thread [Next in Thread>