Re: Dizzy drive spindle - obscure question

[Frank Clarici <spritenut@Exit109.com>]

Ron Soave wrote:
> 
> Does anyone have a feel for what kind of clearance there should be between
> the dizzy drive spindle and the block? 

Ron

The dizzy drive has an "O" ring on it to keep the oil in the block.
Sometimes this "O" ring comes with conversion gasket sets, latly is has
not been included. Your local hardware store should have the "O" ring,
it is thin so bring in the drive sleeve.
Other than that, the drive fits semi loosly in the block.
The dizzy should also have an "O" ring on it. (later Spridgets anyway)
Same thing, get one from the locals.

Frank