spridgets
[Top] [All Lists]

Re: parts

To: Bkitterer@aol.com
Subject: Re: parts
From: pasgeirsson@juno.com (Paul A Asgeirsson)
Date: Thu, 07 Jan 1999 17:25:59 EST
Cc: Lancer7676@aol.com, spridgets@Autox.Team.Net
References: <850915bf.36951b41@aol.com>
Reply-to: pasgeirsson@juno.com (Paul A Asgeirsson)
Sender: owner-spridgets@autox.team.net
I agree with Bob.  Some of the "rubber" parts look & fit pretty well, but
they are sometimes strange plastic thingies.  A customer recently came in
with a recent restoration done by someone else and the rear tail light
lenses and retainer rings were missing.  The rest of the light boot was
intact with the bulb holder in it.  Turns out that the stop light switch
had stuck in the on position, and the boot got hot and melted off into
the street presumably.  They were just gone.  I have gotten wiper arms
from the asia of you choice and found them better than original.  Go
figure!

Paul
PAsgeirsson@juno.com

On Thu, 7 Jan 1999 15:38:25 EST Bkitterer@aol.com writes:
>
>In a message dated 1/6/99 9:58:58 PM, you wrote:
>
><<One caveat, however, some people on the list have said that some
things
>actually made in Taiwan have been stamped made in England.   I am not 
>sure how to tell the difference, if that is the case.>>
>
>We have received parts with "Made in England" labels on the packages 
>and on the parts but when removed there was "Made in <your favorite
oriental
>country>", mostly on rubber parts and from various vendors.
>
>Bob and Annice
>1960 Sprite
>


<Prev in Thread] Current Thread [Next in Thread>