spridgets
[Top] [All Lists]

Re: Fw: Water temp sending unit threads?

To: "Guy" <Guy@weller-lakes.freeserve.co.uk>, "Ulix Goettsch" <ulix@u.washington.edu>, <Daniel1312@aol.com>
Subject: Re: Fw: Water temp sending unit threads?
From: "Larry & Sandi Miller" <millerls@ado13.com>
Date: Wed, 17 Feb 1999 17:30:12 -0800
Cc: <eriks@netspace.net.au>, <spridgets@autox.team.net>
Reply-to: "Larry & Sandi Miller" <millerls@ado13.com>
Sender: owner-spridgets@autox.team.net
Guy

You may have a point. When I had the 1275 engine in the Bugeye I don't
recall having the adapter on it either.

Larry
-----Original Message-----
From: Guy <Guy@weller-lakes.freeserve.co.uk>
To: Larry Miller <millerls@ado13.com>; Ulix Goettsch
<ulix@u.washington.edu>; Daniel1312@aol.com <Daniel1312@aol.com>
Cc: eriks@netspace.net.au <eriks@netspace.net.au>; spridgets@autox.team.net
<spridgets@autox.team.net>
Date: Wednesday, February 17, 1999 4:01 PM
Subject: Re: Fw: Water temp sending unit threads?


>I would guess that the critical thing is the length of the temperature
>sensor bulb. It would be fairly typical of MOWOG to have a variety of
sizes,
>the longer ones needing the additional spacer before fitting into the head
?
>
>Guy
>-----Original Message-----
>From: Larry Miller <millerls@ado13.com>
>To: Ulix Goettsch <ulix@u.washington.edu>; Daniel1312@aol.com
><Daniel1312@aol.com>
>Cc: eriks@netspace.net.au <eriks@netspace.net.au>; spridgets@autox.team.net
><spridgets@autox.team.net>
>Date: 16 February 1999 23:28
>Subject: Re: Fw: Water temp sending unit threads?
>
>
>>Me thinks it will work on a 1098 without the spacer.
>>
>>Larry Miller
>>-----Original Message-----
>>From: Ulix Goettsch <ulix@u.washington.edu>
>>To: Daniel1312@aol.com <Daniel1312@aol.com>
>>Cc: eriks@netspace.net.au <eriks@netspace.net.au>;
spridgets@autox.team.net
>><spridgets@autox.team.net>
>>Date: 16 February, 1999 2:56 PM
>>Subject: Re: Fw: Water temp sending unit threads?
>>
>>
>>>On Tue, 16 Feb 1999 Daniel1312@aol.com wrote:
>>>
>>>> with the adaptor piece.  Probably the adaptor piece is 5/8 thread and
>>uses a
>>>> different & short sender to enable everything to fit ok.
>>>
>>>Daniel,
>>>
>>>on 1275s, the "adaptor" is really just a spacer and has the same thread
>>>size on the male and female ends.  I transferred my sender from the
>>>downflow radiator to the head w/o the spacer and it did get somewhat
>>>mangled.
>>>Do get the spacer.
>>>
>>>    Ulix                                       __/__,__      ___/__|\__
>>>..............................................(_o____o_)....<_O_____O_/..
.
>>>                                              '67 Sprite     '74 X1/9
>>>
>>>
>>
>>
>>
>
>



<Prev in Thread] Current Thread [Next in Thread>