I would guess that the critical thing is the length of the temperature
sensor bulb. It would be fairly typical of MOWOG to have a variety of sizes,
the longer ones needing the additional spacer before fitting into the head ?
Guy
-----Original Message-----
From: Larry Miller <millerls@ado13.com>
To: Ulix Goettsch <ulix@u.washington.edu>; Daniel1312@aol.com
<Daniel1312@aol.com>
Cc: eriks@netspace.net.au <eriks@netspace.net.au>; spridgets@autox.team.net
<spridgets@autox.team.net>
Date: 16 February 1999 23:28
Subject: Re: Fw: Water temp sending unit threads?
>Me thinks it will work on a 1098 without the spacer.
>
>Larry Miller
>-----Original Message-----
>From: Ulix Goettsch <ulix@u.washington.edu>
>To: Daniel1312@aol.com <Daniel1312@aol.com>
>Cc: eriks@netspace.net.au <eriks@netspace.net.au>; spridgets@autox.team.net
><spridgets@autox.team.net>
>Date: 16 February, 1999 2:56 PM
>Subject: Re: Fw: Water temp sending unit threads?
>
>
>>On Tue, 16 Feb 1999 Daniel1312@aol.com wrote:
>>
>>> with the adaptor piece. Probably the adaptor piece is 5/8 thread and
>uses a
>>> different & short sender to enable everything to fit ok.
>>
>>Daniel,
>>
>>on 1275s, the "adaptor" is really just a spacer and has the same thread
>>size on the male and female ends. I transferred my sender from the
>>downflow radiator to the head w/o the spacer and it did get somewhat
>>mangled.
>>Do get the spacer.
>>
>> Ulix __/__,__ ___/__|\__
>>..............................................(_o____o_)....<_O_____O_/...
>> '67 Sprite '74 X1/9
>>
>>
>
>
>
|