Rear brake shoe removal / replace on '62 Sprite

[Dave_Vrba@mail.sel.sony.com (Dave Vrba)]

     Listers,
     
     Please someone give me the real procedure on removing the rear brake 
     shoes properly on a '62 Sprite.  Also the reassemble process.  The 
     HAYNES manual talks about "pivot posts" and "depressing each of the 
     shoe steady springs", "adjuster and mask" etc. etc.  
     
     The exploded view of the rear brake assembly doesn't identify any of 
     these terms or parts in the assembly.
     
     I want to get the shoes off, clean everything real good, put in a 
     cylinder kit and replace new shoes correctly.
     
     By the way, on the left rear (only side I have exposed currently) the 
     bottom spring is attached on the OUTside across the shoes.  Pictures 
     I've seen show this spring on the INside of the shoe towards the 
     backplate.  Did DPO put it on wrong?
     
     Any guiding light help to make this rear brake shoe extraction and 
     reassemble go smoothly without bleeding tooooo much would be 
     appreciated.  I know once I do it right with the experts help and 
     guidance on tricks, I'll never forget.
     
     TIA,
     
     Dave
     '62 MKII Sprite
     Dublin, CA