spridgets
[Top] [All Lists]

Re: fulcrum pin inner

To: "Peter C." <nosimport@mailbag.com>
Subject: Re: fulcrum pin inner
From: Frank Clarici <spritenut@Exit109.com>
Date: Tue, 11 May 1999 23:36:12 -0400
Cc: spridgets@autox.team.net
Organization: Positive Earth Drivers Club
References: <4.1.19990511170818.00acedb0@mailbag.com>
Reply-to: Frank Clarici <spritenut@Exit109.com>
Sender: owner-spridgets@autox.team.net
"Peter C." wrote:
> 
> Listerati,
>         Had occasion to attempt to find nuts for the special inner fulcrum 
>pins.
> This was for the new ones VB sells. All the data and samples I had are 3/8"
> x 24 as were his original. The VB cadmium plated pins are not a standard
> SAE nor metric (nor drilled for a castlelated nut) Any hints? Do we need
> Whitworth nylocs?
>         Thanks  Peter C

Peter

They SHOULD be 3/8 x 24. Originals were, all mine are, all mine taken
apart were.
3/8 x 24 is a very common nut.
VB has turned to the orient for a lot of their "stuff" maybe you need
chinese nuts?

Happy huntingson
-- 
Frank Clarici
Toms River, NJ
Bugeye Sprite
67 Sprite
59 A40
http://www.exit109.com/~spritenut/

<Prev in Thread] Current Thread [Next in Thread>