Hi Richard,
The Front Pully nut is standard thread. Clockwise to tighten;
anti-clockwise to undo.
You are lucky to have an air tool. The first few times I had to
remove those bolts, I had to use a cold chisel and lump hammer!
It worked, but it did a lot of damage to the edges of the bolt, which
then had to be filed level later. Eventually, I got the proper socket.
Ron Corry,
Founder member of the Austin-Healey Club of Ireland.
'59 Sprite "Oggibip", whose 40th anniversary of first registration is
4-Jul-99
==============================================
At 03:09 22/06/99 -0400, you wrote: Snip %-<
>I am pulling that bolt later today. Is it right handed?
>
>I have an air wrench so that is good!
>
>Richard Bergstrom, President
>Central Virginia British Car Club
|