I didnt like the glue solution on my emblem, so I drilled small holes in the
pegs of the emblem at the right height for the emblem to sit flush, then I
used 4 small long cotter keys through the holes and carefully bent them with
out breaking the plastic pegs.... good luck..
Toby
>Hi Larry
>
>
>Been there too. I thought it was a rock that flew up and almost cracked my
>windscreen from the huge tractor trailer in front of me. I ended up with
the
>RTV glue holding it on and the clips that I hammered in. If I ever need to
>remove it, the paint and all will go.
>
>British Car Specialties in Stockton has them on the shelf.
>
>Rick
>
>Larry Miller wrote:
>
>> Roaring down the road on my way to work this morning something zipped by
my
>> head and I thought it must have been a bird. Got to work and happened to
>> walk around the front of the car, and there where the Sprite emblem
should
>> be, is a big empty hole.
>>
>> Larry Miller
>> http://www.ado13.com
>> Seen It All, Done It All, Can't Remember Most Of It.
>
>--
>52 MGTD,Sparky 74 MGB, B-tris 76 XJ12 Coupe, Jacque
>60 Bugeye, Puddles 58 MGA Coupe, Ruby
>http://www.softcom.net/users/walters
>http://www.geocities.com/Heartland/Acres/4644
>
>
>
|