spridgets
[Top] [All Lists]

Re: Weber Set-up??

To: "Ron Soave" <soavero@yahoo.com>, <Kroyell@aol.com>, <spridgets@autox.team.net>
Subject: Re: Weber Set-up??
From: "Wm. Severin Thompson" <wsthompson@thicko.com>
Date: Thu, 19 Aug 1999 09:49:16 -0500
References: <19990819142952.11157.rocketmail@web601.yahoomail.com>
Reply-to: "Wm. Severin Thompson" <wsthompson@thicko.com>
Sender: owner-spridgets@autox.team.net
That's it... thanks.

WST
----- Original Message -----
From: Ron Soave <soavero@yahoo.com>
To: Wm. Severin Thompson <wsthompson@thicko.com>; <Kroyell@aol.com>;
<spridgets@autox.team.net>
Sent: Thursday, August 19, 1999 9:29 AM
Subject: Re: Weber Set-up??


> Might have been:
>
> http://yallara.cs.rmit.edu.au/~mg/cars/goblins/tech/webers.htm
>
> --- "Wm. Severin Thompson" <wsthompson@thicko.com>
> wrote:
> > To all,
> >
> > Somewhere... maybe off the list or on the
> > Puddlejumper set was a write up
> > entitled, "Having Trouble Setting up your Weber?".
> > It had all sorts of
> > engine and head configurations, and the suggested
> > jetting for various
> > applications.
> >
> > Does anyone remember this and know where it can be
> > found?
> >
> > WST
> > ----- Original Message -----
> > From: Ron Soave <soavero@yahoo.com>
> > To: <Kroyell@aol.com>; <spridgets@autox.team.net>
> > Sent: Thursday, August 19, 1999 7:40 AM
> > Subject: Re: Weber Set-up??
> >
> >
> > > > I also put on a "soft mount" kit at the same
> > time,
> > > > has anyone had problems
> > > > relating to these kits??
> > >
> > > My 45DCOE came w/ the soft mount kit, and an
> > extremely
> > > respected mechanic friend who is a "by the book"
> > guy
> > > with lots of Weber experience suggested I ignore
> > the
> > > instructs and tighten the nuts down almost
> > completely.
> > >  He has seen leaks and damage resulting from the
> > > assembly being too loose.  I do not have very long
> > > term usage yet (~1 yr), but so far so good.  I did
> > not
> > > overtighten the nuts, but did go beyond the torque
> > > setting recommended in the limited instructions.
> > It
> > > seemed like the carb was flapping in the breeze
> > too
> > > much at the low torque.
> > >
> > >
> > > Bid and sell for free at http://auctions.yahoo.com
> > >
> > >
> >
> >
>
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
>
>


<Prev in Thread] Current Thread [Next in Thread>