spridgets
[Top] [All Lists]

Re: Weber Set-up??

To: "Larry Miller" <millerls@ado13.com>, <Kroyell@aol.com>, <spridgets@autox.team.net>
Subject: Re: Weber Set-up??
From: "Mike Gigante" <mikeg@vicnet.net.au>
Date: Fri, 20 Aug 1999 11:05:12 +1000
References: <5546254f.24ece7dc@aol.com> <002501beea4e$b24cd140$579ee3cd@fnmoc>
Reply-to: "Mike Gigante" <mikeg@vicnet.net.au>
Sender: owner-spridgets@autox.team.net
I have had no problems with the soft mount kits. I have used them
on all my road, rally and race cars.

Mike

----- Original Message -----
From: Larry Miller <millerls@ado13.com>
To: <Kroyell@aol.com>; <spridgets@autox.team.net>
Sent: Friday, 20 August 1999 0:25
Subject: Re: Weber Set-up??


> No problems here with the "soft" mounts. Never changed my chokes so can't
> help there. If all else fails call David at APT. Very nice person and will
> try to help you.
>
> Larry Miller
> http://www.ado13.com
> Dogs Think They Are Human, Cats Think They Are God.
>
>
>
>
>
>
>
>
>
> ----- Original Message -----
> From: <Kroyell@aol.com>
> To: <spridgets@autox.team.net>
> Sent: Wednesday, August 18, 1999 9:53 PM
> Subject: Weber Set-up??
>
>
> > Hi all
> >
> > Today I changed the chokes on my 45 DCOE to 34mm from 36mm's to help
with
> a
> > poor performance problem at RPMs below 2k. As a result I now have
totally
> > lost all power from the main circuit and the Idle circuit isn't working
> very
> > well ether. Are there any formulas or experience out there with this
> problem.
> > What change in Main and Idle jets is needed to compensate for a 2mm
> movement
> > in choke size? The engine is a 1275 with light modifications.
> > I also put on a "soft mount" kit at the same time, has anyone had
problems
> > relating to these kits??
> >
> > Thanks
> >
> > York Powell
> > 72 Midget
> > "the baby car"
> >
>
>


<Prev in Thread] Current Thread [Next in Thread>