spridgets
[Top] [All Lists]

Re: waster temp guage

To: Robert Duquette <RobertDuquette@Sympatico.ca>
Subject: Re: waster temp guage
From: David Wood <dewood@sentex.net>
Date: Mon, 06 Sep 1999 19:55:49 -0400
Cc: spridgets@autox.team.net
References: <007c01bef8ba$316bb3a0$49a3acce@b1pxof71>
Reply-to: David Wood <dewood@sentex.net>
Sender: owner-spridgets@autox.team.net
Robert!

        UNF is Unified National Fine.  #10-32, 1/4-24 etc.
        UNC is Unified National Coarse.  #10-24, 1/4-20 etc.

        The British, at least BMC, used a lot of UNF threads.  I think it
matched close one of their many own threads.  The only things which
arn't UNF are the fastners on the carberators.

        Catch you later

Robert Duquette wrote:
> 
> Ok! < sheepishness >  What's a UNF?  I know what a UFO is.
> 
> Robert D.
> 
> -----Original Message-----
> From: Larry & Sandi Miller <millerls@ado13.com>
> 
> >5/8 x 16 UNF or 5/8 x 18 UNF
> >
> >Larry Miller
> >
> >----- Original Message -----
> >From: Ron Soave <soavero@yahoo.com>
> >To: <BCAH@aol.com>; <spridgets@autox.team.net>
> >Sent: Sunday, September 05, 1999 7:41 PM
> >Subject: Re: waster temp guage
> >
> >
> >>
> >> Bob,
> >> I do not recall needing an adapter to do the bulb
> >> relo, and I had a plug in my hardware bin.  Nothing
> >> unusual, just a pipe plug.  Don't recall size,
> >> although I just reassembled my head not even an hour
> >> ago (car works, goes like hell for those who care).
> >> Pretty large, 1/2 inch maybe?
> >>
> >> Ron
> >>
> >>
> >> --- BCAH@aol.com wrote:
> >> > I am still researching the "948-to-1275" switch for
> >> > my Bugeye. As I
> >> > understand it,  the mech water temp bulb (which
> >> > normally screws into the
> >> > radiator) just simply screws into the engine cyl
> >> > head. Is this true? Someone
> >> > said there was an adaptor involved to do
> >> > this,-----11K2846--------as the bulb
> >> > itself was too long. Am I on the right track? If I
> >> > did this , what blocks up
> >> > the new hole in the radiator?  Of course, an old
> >> > bulb from the trash bin
> >> > would work,----but what thread bolt would be used to
> >> > plug the hole? Somehow I
> >> > get a feeling you can not just go down to the
> >> > hardware store and buy a brass
> >> > plug fitting. There was thread some time ago about
> >> > British screwthreads
> >> > being different from USA stuff . The difference
> >> > being very small.  I think
> >> > this is why why people are just forcing stuff
> >> > together and getting away with
> >> > it. What do you people think?  Bob C
> >> >
> >>
> >>
> >>
> >> Bid and sell for free at http://auctions.yahoo.com
> >>
> >
> >
> >

-- 
--------------------------------------------------|-----|-------------------
            David E. Wood       v               / |\    |\\         
          dewood@sentex.net         v          /  | |   | |\         
    http://www.sentex.net/~dewood        |====/__ |/    |/ _\__-----
      1960 Austin Healey Sprite          |__O_===---------====/
          1967 Ford Mustang        v       |    o o o o o o  /
----------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^-

<Prev in Thread] Current Thread [Next in Thread>